Ошибка при установке через порт usb 2
Добавлено: 28 янв 2018, 11:59
Конфигурация
ardein@Home ~ $ inxi -Fxz
System: Host: Home Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: Gigabyte product: N/A
Mobo: Gigabyte model: 970A-DS3P v: x.x
Bios: American Megatrends v: F1 date: 04/08/2013
CPU: Hexa core AMD FX-6300 Six-Core (-MCP-) cache: 12288 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 42196
clock speeds: max: 3500 MHz 1: 2000 MHz 2: 1400 MHz 3: 1400 MHz
4: 1400 MHz 5: 1400 MHz 6: 2500 MHz
Graphics: Card: NVIDIA GM107 [GeForce GTX 750 Ti] bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1920x1080@60.00hz
GLX Renderer: GeForce GTX 750 Ti/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.111 Direct Rendering: Yes
Audio: Card-1 NVIDIA Device 0fbc driver: snd_hda_intel bus-ID: 01:00.1
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1620.3GB (30.8% used)
ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB
ID-2: /dev/sdb model: ST1000DM003 size: 1000.2GB
ID-3: USB /dev/sdc model: Transcend size: 500.1GB
Partition: ID-1: / size: 37G used: 6.7G (20%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 55G used: 19G (36%) fs: ext4 dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.9C mobo: N/A gpu: 0.0:34C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 226 Uptime: 12 min Memory: 1338.5/8010.9MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
System: Host: Home Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: Gigabyte product: N/A
Mobo: Gigabyte model: 970A-DS3P v: x.x
Bios: American Megatrends v: F1 date: 04/08/2013
CPU: Hexa core AMD FX-6300 Six-Core (-MCP-) cache: 12288 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 42196
clock speeds: max: 3500 MHz 1: 2000 MHz 2: 1400 MHz 3: 1400 MHz
4: 1400 MHz 5: 1400 MHz 6: 2500 MHz
Graphics: Card: NVIDIA GM107 [GeForce GTX 750 Ti] bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1920x1080@60.00hz
GLX Renderer: GeForce GTX 750 Ti/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.111 Direct Rendering: Yes
Audio: Card-1 NVIDIA Device 0fbc driver: snd_hda_intel bus-ID: 01:00.1
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1620.3GB (30.8% used)
ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB
ID-2: /dev/sdb model: ST1000DM003 size: 1000.2GB
ID-3: USB /dev/sdc model: Transcend size: 500.1GB
Partition: ID-1: / size: 37G used: 6.7G (20%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 55G used: 19G (36%) fs: ext4 dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.9C mobo: N/A gpu: 0.0:34C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 226 Uptime: 12 min Memory: 1338.5/8010.9MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35