Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Не знаете как установить драйвер? Возникли проблемы? Вам сюда!
Правила форума
Как правильно задавать вопросы Правильно сформулированный вопрос и его грамотное оформление способствует высокой вероятности получения достаточно содержательного и по существу ответа. Общая рекомендация по составлению тем: 1. Версия ОС вместе с разрядностью. Пример: LM 18.1 x64, LM Sarah x32 2. DE. Если вопрос касается двух, то через запятую. (xfce, KDE, cinnamon, mate) 3. Какое железо. (достаточно вывод inxi -Fxz в спойлере (как пользоваться спойлером смотрим здесь)) или же дать ссылку на hw-probe 4. Суть. Желательно с выводом консоли, логами. 5. Скрин. Просьба указывать 1, 2 и 3 независимо от того, имеет ли это отношение к вопросу или нет. Так же не забываем об общих правилах Как пример вот
Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 14 май 2018, 16:36

Unborn писал(а):
14 май 2018, 11:28
Нормальное явление
Я об этом хотел сказать:
Fermi-based GPUs are no longer be supported starting with release 396. These GPUs will continue to be supported through the release 390 legacy branch, which will receive critical bug fixes and updates for compatibility with new Linux kernels and X server versions through the end of 2022.
Вчера манджарик у меня обновил видеодрайвер уже до 396.24, но..
With the current Nvidia driver release v396.24, support for the old Fermi cards got dropped. Please switch either over to Nouveau driver or downgrade to v390xx driver series.
Моя карточка в принципе рядышком мимо списка прошла (820M - 840М).


Skrimer
Сообщения: 1
Зарегистрирован: 17 май 2018, 17:56

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение Skrimer » 17 май 2018, 20:16

По инструкции встал четко НО:
- Чет после запила бамбэлби на интеле диагональные разрывы прям запарили
- Пропал HDMI как таковой из xrandr. Как итог на ТВ глухо.
Куда копать? Версия невидиадров 390.

Asus-N53Jf
Graphics: Card-1: Intel Core Processor Integrated Graphics Controller
Card-2: NVIDIA GF108M [GeForce GT 425M]
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau


sheriff
Сообщения: 10
Зарегистрирован: 29 авг 2017, 06:02
Поблагодарили: 1 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение sheriff » 30 май 2018, 19:04

Народ помогите уже руки опускаются все перепробовал ядра дрова нефига не хочет работать на nvidia, на nouveau запускается:

Lenovo g580 ядро 4.4 nvidia 390

Код: Выделить всё

lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)

Код: Выделить всё

[   421.981] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[   421.981] X Protocol Version 11, Revision 0
[   421.981] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[   421.981] Current Operating System: Linux sheriff-Lenovo-G580 4.4.0-127-generic #153-Ubuntu SMP Sat May 19 10:58:46 UTC 2018 x86_64
[   421.981] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-127-generic root=UUID=5f34e8b4-0aff-4088-a4e7-c662772a9880 ro nogpumanager quiet splash vt.handoff=7
[   421.981] Build Date: 13 October 2017  01:57:05PM
[   421.981] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[   421.981] Current version of pixman: 0.33.6
[   421.981] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   421.981] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   421.981] (==) Log file: "/var/log/Xorg.8.log", Time: Wed May 30 21:46:12 2018
[   421.981] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   421.981] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   421.981] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   421.982] (==) ServerLayout "Layout0"
[   421.982] (**) |-->Screen "Default Screen" (0)
[   421.982] (**) |   |-->Monitor "<default monitor>"
[   421.982] (**) |   |-->Device "DiscreteNvidia"
[   421.982] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[   421.982] (**) Option "AutoAddDevices" "false"
[   421.982] (**) Option "AutoAddGPU" "false"
[   421.982] (**) Not automatically adding devices
[   421.982] (==) Automatically enabling devices
[   421.982] (**) Not automatically adding GPU devices
[   421.982] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   421.982] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   421.982] 	Entry deleted from font path.
[   421.983] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   421.983] 	Entry deleted from font path.
[   421.983] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   421.983] 	Entry deleted from font path.
[   421.983] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   421.983] 	Entry deleted from font path.
[   421.983] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   421.983] 	Entry deleted from font path.
[   421.983] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   421.983] (++) ModulePath set to "/usr/lib/nvidia-390/xorg,/usr/lib/xorg/modules"
[   421.983] (==) |-->Input Device "<default pointer>"
[   421.983] (==) |-->Input Device "<default keyboard>"
[   421.983] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   421.983] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   421.983] (II) Loader magic: 0x560d46c73dc0
[   421.983] (II) Module ABI versions:
[   421.983] 	X.Org ANSI C Emulation: 0.4
[   421.983] 	X.Org Video Driver: 20.0
[   421.983] 	X.Org XInput driver : 22.1
[   421.983] 	X.Org Server Extension : 9.0
[   421.984] (--) using VT number 7

[   421.984] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   421.985] (II) xfree86: Adding drm device (/dev/dri/card0)
[   421.985] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   421.985] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[   421.987] (--) PCI:*(0:1:0:0) 10de:1140:17aa:3983 rev 161, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[   421.988] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[   421.988] (II) "glx" will be loaded by default.
[   421.988] (II) LoadModule: "glx"
[   421.988] (II) Loading /usr/lib/nvidia-390/xorg/libglx.so
[   421.994] (II) Module glx: vendor="NVIDIA Corporation"
[   421.994] 	compiled for 4.0.2, module version = 1.0.0
[   421.994] 	Module class: X.Org Server Extension
[   421.994] (II) NVIDIA GLX Module  390.59  Wed May  9 21:54:15 PDT 2018
[   421.994] (II) LoadModule: "nvidia"
[   421.994] (II) Loading /usr/lib/nvidia-390/xorg/nvidia_drv.so
[   421.995] (II) Module nvidia: vendor="NVIDIA Corporation"
[   421.995] 	compiled for 4.0.2, module version = 1.0.0
[   421.995] 	Module class: X.Org Video Driver
[   421.995] (II) LoadModule: "mouse"
[   421.995] (WW) Warning, couldn't open module mouse
[   421.995] (II) UnloadModule: "mouse"
[   421.995] (II) Unloading mouse
[   421.996] (EE) Failed to load module "mouse" (module does not exist, 0)
[   421.996] (II) LoadModule: "kbd"
[   421.996] (WW) Warning, couldn't open module kbd
[   421.996] (II) UnloadModule: "kbd"
[   421.996] (II) Unloading kbd
[   421.996] (EE) Failed to load module "kbd" (module does not exist, 0)
[   421.996] (II) NVIDIA dlloader X Driver  390.59  Wed May  9 21:30:06 PDT 2018
[   421.996] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   421.996] (II) Loading sub module "fb"
[   421.996] (II) LoadModule: "fb"
[   421.996] (II) Loading /usr/lib/xorg/modules/libfb.so
[   421.996] (II) Module fb: vendor="X.Org Foundation"
[   421.996] 	compiled for 1.18.4, module version = 1.0.0
[   421.996] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   421.996] (II) Loading sub module "wfb"
[   421.996] (II) LoadModule: "wfb"
[   421.997] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   421.997] (II) Module wfb: vendor="X.Org Foundation"
[   421.997] 	compiled for 1.18.4, module version = 1.0.0
[   421.997] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   421.997] (II) Loading sub module "ramdac"
[   421.997] (II) LoadModule: "ramdac"
[   421.997] (II) Module "ramdac" already built-in
[   421.997] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[   421.998] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   421.998] (==) NVIDIA(0): RGB weight 888
[   421.998] (==) NVIDIA(0): Default visual is TrueColor
[   421.998] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   421.998] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[   421.998] (**) NVIDIA(0): Option "UseEDID" "false"
[   421.998] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[   421.998] (**) NVIDIA(0): Enabling 2D acceleration
[   421.998] (**) NVIDIA(0): Ignoring EDIDs
[   421.998] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[   421.998] (**) NVIDIA(0):     mode
[   426.754] (II) NVIDIA(0): NVIDIA GPU GeForce 610M (GF117) at PCI:1:0:0 (GPU-0)
[   426.754] (--) NVIDIA(0): Memory: 1048576 kBytes
[   426.754] (--) NVIDIA(0): VideoBIOS: 75.17.2e.00.04
[   426.754] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[   426.754] (II) NVIDIA(0): Validated MetaModes:
[   426.754] (II) NVIDIA(0):     "NULL"
[   426.754] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   426.754] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   426.754] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   426.754] (--) Depth 24 pixmap format is 32 bpp
[   426.755] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[   426.755] (II) NVIDIA:     access.
[   449.752] (EE) 
Fatal server error:
[   449.752] (EE) NVIDIA: A GPU exception occurred during X server initialization(EE) 
[   449.752] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   449.752] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   449.752] (EE) 
[   449.754] (EE) Server terminated with error (1). Closing log file.

Код: Выделить всё

[     5.777] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     5.777] X Protocol Version 11, Revision 0
[     5.777] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     5.777] Current Operating System: Linux sheriff-Lenovo-G580 4.4.0-127-generic #153-Ubuntu SMP Sat May 19 10:58:46 UTC 2018 x86_64
[     5.777] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-127-generic root=UUID=5f34e8b4-0aff-4088-a4e7-c662772a9880 ro nogpumanager quiet splash vt.handoff=7
[     5.777] Build Date: 13 October 2017  01:57:05PM
[     5.777] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[     5.777] Current version of pixman: 0.33.6
[     5.777] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.777] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.777] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 30 21:39:16 2018
[     5.781] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.782] (==) No Layout section.  Using the first Screen section.
[     5.782] (==) No screen section available. Using defaults.
[     5.783] (**) |-->Screen "Default Screen Section" (0)
[     5.783] (**) |   |-->Monitor "<default monitor>"
[     5.787] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.787] (==) Automatically adding devices
[     5.787] (==) Automatically enabling devices
[     5.787] (==) Automatically adding GPU devices
[     5.787] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.787] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.787] 	Entry deleted from font path.
[     5.787] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.787] 	Entry deleted from font path.
[     5.787] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.787] 	Entry deleted from font path.
[     5.787] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.787] 	Entry deleted from font path.
[     5.787] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.787] 	Entry deleted from font path.
[     5.787] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.787] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     5.787] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.787] (II) Loader magic: 0x560d96770dc0
[     5.787] (II) Module ABI versions:
[     5.787] 	X.Org ANSI C Emulation: 0.4
[     5.787] 	X.Org Video Driver: 20.0
[     5.787] 	X.Org XInput driver : 22.1
[     5.787] 	X.Org Server Extension : 9.0
[     5.793] (++) using VT number 7

[     5.794] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.794] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.797] (--) PCI:*(0:0:2:0) 8086:0106:17aa:3977 rev 9, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[     5.797] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     5.797] (II) "glx" will be loaded by default.
[     5.797] (II) LoadModule: "glx"
[     5.805] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.812] (II) Module glx: vendor="X.Org Foundation"
[     5.812] 	compiled for 1.18.4, module version = 1.0.0
[     5.812] 	ABI class: X.Org Server Extension, version 9.0
[     5.812] (==) AIGLX enabled
[     5.812] (==) Matched intel as autoconfigured driver 0
[     5.812] (==) Matched intel as autoconfigured driver 1
[     5.812] (==) Matched modesetting as autoconfigured driver 2
[     5.812] (==) Matched fbdev as autoconfigured driver 3
[     5.812] (==) Matched vesa as autoconfigured driver 4
[     5.812] (==) Assigned the driver to the xf86ConfigLayout
[     5.812] (II) LoadModule: "intel"
[     5.812] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.813] (II) Module intel: vendor="X.Org Foundation"
[     5.813] 	compiled for 1.18.4, module version = 2.99.917
[     5.813] 	Module class: X.Org Video Driver
[     5.813] 	ABI class: X.Org Video Driver, version 20.0
[     5.813] (II) LoadModule: "modesetting"
[     5.813] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.813] (II) Module modesetting: vendor="X.Org Foundation"
[     5.813] 	compiled for 1.18.4, module version = 1.18.4
[     5.813] 	Module class: X.Org Video Driver
[     5.813] 	ABI class: X.Org Video Driver, version 20.0
[     5.813] (II) LoadModule: "fbdev"
[     5.814] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.814] (II) Module fbdev: vendor="X.Org Foundation"
[     5.814] 	compiled for 1.18.1, module version = 0.4.4
[     5.814] 	Module class: X.Org Video Driver
[     5.814] 	ABI class: X.Org Video Driver, version 20.0
[     5.814] (II) LoadModule: "vesa"
[     5.814] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.814] (II) Module vesa: vendor="X.Org Foundation"
[     5.814] 	compiled for 1.18.1, module version = 2.3.4
[     5.814] 	Module class: X.Org Video Driver
[     5.814] 	ABI class: X.Org Video Driver, version 20.0
[     5.814] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.814] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     5.814] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     5.814] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     5.814] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.814] (II) FBDEV: driver for framebuffer: fbdev
[     5.814] (II) VESA: driver for VESA chipsets: vesa
[     5.815] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[     5.815] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[     5.815] (II) intel(0): SNA compiled for use with valgrind
[     5.816] (WW) Falling back to old probe method for modesetting
[     5.816] (WW) Falling back to old probe method for fbdev
[     5.816] (II) Loading sub module "fbdevhw"
[     5.816] (II) LoadModule: "fbdevhw"
[     5.816] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.816] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.816] 	compiled for 1.18.4, module version = 0.0.2
[     5.816] 	ABI class: X.Org Video Driver, version 20.0
[     5.816] (WW) Falling back to old probe method for vesa
[     5.817] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[     5.817] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[     5.817] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.817] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.817] (==) intel(0): RGB weight 888
[     5.817] (==) intel(0): Default visual is TrueColor
[     5.818] (II) intel(0): Output LVDS1 has no monitor section
[     5.832] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[     5.832] (II) intel(0): Enabled output LVDS1
[     5.832] (II) intel(0): Output VGA1 has no monitor section
[     5.832] (II) intel(0): Enabled output VGA1
[     5.832] (II) intel(0): Output HDMI1 has no monitor section
[     5.832] (II) intel(0): Enabled output HDMI1
[     5.832] (II) intel(0): Output DP1 has no monitor section
[     5.832] (II) intel(0): Enabled output DP1
[     5.832] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.832] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.832] (II) intel(0): Enabled output VIRTUAL1
[     5.832] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[     5.832] (==) intel(0): TearFree disabled
[     5.832] (==) intel(0): DPI set to (96, 96)
[     5.832] (II) Loading sub module "dri2"
[     5.832] (II) LoadModule: "dri2"
[     5.832] (II) Module "dri2" already built-in
[     5.832] (II) Loading sub module "present"
[     5.832] (II) LoadModule: "present"
[     5.832] (II) Module "present" already built-in
[     5.832] (II) UnloadModule: "modesetting"
[     5.832] (II) Unloading modesetting
[     5.832] (II) UnloadModule: "fbdev"
[     5.833] (II) Unloading fbdev
[     5.833] (II) UnloadSubModule: "fbdevhw"
[     5.833] (II) Unloading fbdevhw
[     5.833] (II) UnloadModule: "vesa"
[     5.833] (II) Unloading vesa
[     5.833] (==) Depth 24 pixmap format is 32 bpp
[     5.836] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend
[     5.836] (==) intel(0): Backing store enabled
[     5.836] (==) intel(0): Silken mouse enabled
[     5.837] (II) intel(0): HW Cursor enabled
[     5.837] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.837] (==) intel(0): DPMS enabled
[     5.837] (==) intel(0): Display hotplug detection enabled
[     5.837] (II) intel(0): [DRI2] Setup complete
[     5.837] (II) intel(0): [DRI2]   DRI driver: i965
[     5.837] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.837] (II) intel(0): direct rendering: DRI2 enabled
[     5.837] (II) intel(0): hardware support for Present enabled
[     5.837] (--) RandR disabled
[     5.847] (II) SELinux: Disabled on system
[     5.880] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.880] (II) AIGLX: enabled GLX_ARB_create_context
[     5.880] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.880] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     5.880] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.880] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     5.880] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     5.880] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     5.880] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     5.880] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.880] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     5.880] (II) AIGLX: Loaded and initialized i965
[     5.880] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.883] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[     5.883] (II) intel(0): Setting screen physical size to 361 x 203
[     5.936] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.936] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.936] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.936] (II) LoadModule: "libinput"
[     5.937] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.940] (II) Module libinput: vendor="X.Org Foundation"
[     5.940] 	compiled for 1.18.4, module version = 0.18.0
[     5.940] 	Module class: X.Org XInput Driver
[     5.940] 	ABI class: X.Org XInput driver, version 22.1
[     5.940] (II) Using input driver 'libinput' for 'Power Button'
[     5.940] (**) Power Button: always reports core events
[     5.940] (**) Option "Device" "/dev/input/event2"
[     5.940] (**) Option "_source" "server/udev"
[     5.940] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     5.940] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     5.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.960] (**) Option "xkb_model" "pc105"
[     5.960] (**) Option "xkb_layout" "us"
[     5.960] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     5.960] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     5.961] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     5.961] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.961] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.961] (II) Using input driver 'libinput' for 'Video Bus'
[     5.961] (**) Video Bus: always reports core events
[     5.961] (**) Option "Device" "/dev/input/event5"
[     5.961] (**) Option "_source" "server/udev"
[     5.961] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     5.961] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     5.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event5"
[     5.972] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.972] (**) Option "xkb_model" "pc105"
[     5.972] (**) Option "xkb_layout" "us"
[     5.972] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     5.972] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     5.973] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     5.973] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.973] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.973] (II) Using input driver 'libinput' for 'Video Bus'
[     5.973] (**) Video Bus: always reports core events
[     5.973] (**) Option "Device" "/dev/input/event4"
[     5.973] (**) Option "_source" "server/udev"
[     5.973] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     5.973] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     5.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3b/LNXVIDEO:00/input/input6/event4"
[     5.989] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     5.989] (**) Option "xkb_model" "pc105"
[     5.989] (**) Option "xkb_layout" "us"
[     5.990] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     5.990] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     5.990] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     5.990] (II) No input driver specified, ignoring this device.
[     5.990] (II) This device may have been added with another device file.
[     5.991] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     5.991] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.991] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.991] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.991] (**) Sleep Button: always reports core events
[     5.991] (**) Option "Device" "/dev/input/event1"
[     5.991] (**) Option "_source" "server/udev"
[     5.991] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     5.991] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.000] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.000] (**) Option "xkb_model" "pc105"
[     6.000] (**) Option "xkb_layout" "us"
[     6.002] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     6.002] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.003] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event6)
[     6.003] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[     6.003] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[     6.003] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[     6.003] (**) USB USB Keykoard: always reports core events
[     6.003] (**) Option "Device" "/dev/input/event6"
[     6.003] (**) Option "_source" "server/udev"
[     6.003] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[     6.003] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[     6.012] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1A2C:0023.0001/input/input8/event6"
[     6.012] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[     6.012] (**) Option "xkb_model" "pc105"
[     6.012] (**) Option "xkb_layout" "us"
[     6.014] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[     6.014] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[     6.014] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event7)
[     6.015] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[     6.015] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[     6.015] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[     6.015] (**) USB USB Keykoard: always reports core events
[     6.015] (**) Option "Device" "/dev/input/event7"
[     6.015] (**) Option "_source" "server/udev"
[     6.015] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[     6.015] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[     6.028] (II) libinput: USB USB Keykoard: needs a virtual subdevice
[     6.028] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0002/input/input9/event7"
[     6.028] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: MOUSE, id 11)
[     6.028] (**) Option "AccelerationScheme" "none"
[     6.028] (**) USB USB Keykoard: (accel) selected scheme none/0
[     6.028] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[     6.028] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[     6.029] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[     6.029] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[     6.029] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event10)
[     6.029] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[     6.029] (**) Lenovo EasyCamera: Applying InputClass "libinput keyboard catchall"
[     6.029] (II) Using input driver 'libinput' for 'Lenovo EasyCamera'
[     6.029] (**) Lenovo EasyCamera: always reports core events
[     6.029] (**) Option "Device" "/dev/input/event10"
[     6.029] (**) Option "_source" "server/udev"
[     6.030] (II) input device 'Lenovo EasyCamera', /dev/input/event10 is tagged by udev as: Keyboard
[     6.030] (II) input device 'Lenovo EasyCamera', /dev/input/event10 is a keyboard
[     6.052] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11/event10"
[     6.052] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[     6.052] (**) Option "xkb_model" "pc105"
[     6.052] (**) Option "xkb_layout" "us"
[     6.052] (II) input device 'Lenovo EasyCamera', /dev/input/event10 is tagged by udev as: Keyboard
[     6.052] (II) input device 'Lenovo EasyCamera', /dev/input/event10 is a keyboard
[     6.053] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     6.053] (II) No input driver specified, ignoring this device.
[     6.053] (II) This device may have been added with another device file.
[     6.053] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[     6.053] (II) No input driver specified, ignoring this device.
[     6.053] (II) This device may have been added with another device file.
[     6.054] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[     6.054] (II) No input driver specified, ignoring this device.
[     6.054] (II) This device may have been added with another device file.
[     6.054] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[     6.054] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[     6.054] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[     6.054] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[     6.054] (**) Ideapad extra buttons: always reports core events
[     6.054] (**) Option "Device" "/dev/input/event9"
[     6.054] (**) Option "_source" "server/udev"
[     6.055] (II) input device 'Ideapad extra buttons', /dev/input/event9 is tagged by udev as: Keyboard
[     6.055] (II) input device 'Ideapad extra buttons', /dev/input/event9 is a keyboard
[     6.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input10/event9"
[     6.068] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[     6.068] (**) Option "xkb_model" "pc105"
[     6.068] (**) Option "xkb_layout" "us"
[     6.068] (II) input device 'Ideapad extra buttons', /dev/input/event9 is tagged by udev as: Keyboard
[     6.068] (II) input device 'Ideapad extra buttons', /dev/input/event9 is a keyboard
[     6.069] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     6.069] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.069] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.069] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.069] (**) AT Translated Set 2 keyboard: always reports core events
[     6.069] (**) Option "Device" "/dev/input/event3"
[     6.069] (**) Option "_source" "server/udev"
[     6.069] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[     6.069] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is a keyboard
[     6.080] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     6.080] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     6.080] (**) Option "xkb_model" "pc105"
[     6.080] (**) Option "xkb_layout" "us"
[     6.080] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[     6.080] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is a keyboard
[     6.081] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.081] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[     6.081] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     6.081] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.081] (**) Option "Device" "/dev/input/event8"
[     6.081] (**) Option "_source" "server/udev"
[     6.081] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event8 is tagged by udev as: Touchpad Touchscreen
[     6.082] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event8 is a touchpad
[     6.113] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event8"
[     6.113] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[     6.113] (**) Option "AccelerationScheme" "none"
[     6.113] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     6.113] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     6.113] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     6.113] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event8 is tagged by udev as: Touchpad Touchscreen
[     6.114] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event8 is a touchpad
[     6.114] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     6.114] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     6.132] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[     6.132] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[     6.132] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[     6.133] (**) USB USB Keykoard: always reports core events
[     6.133] (**) Option "Device" "/dev/input/event7"
[     6.133] (**) Option "_source" "_driver/libinput"
[     6.133] (II) libinput: USB USB Keykoard: is a virtual subdevice
[     6.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0002/input/input9/event7"
[     6.133] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 16)
[     6.133] (**) Option "xkb_model" "pc105"
[     6.133] (**) Option "xkb_layout" "us"
[     7.059] (II) intel(0): EDID vendor "SEC", prod id 16978
[     7.059] (II) intel(0): Printing DDC gathered Modelines:
[     7.059] (II) intel(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    67.508] (II) config/udev: removing device USB USB Keykoard
[    67.526] (II) UnloadModule: "libinput"
[    67.551] (II) config/udev: removing device USB USB Keykoard
[    67.552] (II) UnloadModule: "libinput"
[    67.552] (II) config/udev: removing device USB USB Keykoard
[    67.572] (II) UnloadModule: "libinput"
[    68.716] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event6)
[    68.716] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    68.716] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    68.716] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    68.716] (**) USB USB Keykoard: always reports core events
[    68.716] (**) Option "Device" "/dev/input/event6"
[    68.716] (**) Option "_source" "server/udev"
[    68.717] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[    68.717] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[    68.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1A2C:0023.0003/input/input15/event6"
[    68.734] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    68.734] (**) Option "xkb_model" "pc105"
[    68.734] (**) Option "xkb_layout" "us"
[    68.734] (WW) Option "xkb_variant" requires a string value
[    68.734] (WW) Option "xkb_options" requires a string value
[    68.735] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[    68.735] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[    68.751] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event7)
[    68.751] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    68.751] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    68.751] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    68.751] (**) USB USB Keykoard: always reports core events
[    68.751] (**) Option "Device" "/dev/input/event7"
[    68.751] (**) Option "_source" "server/udev"
[    68.752] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[    68.752] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[    68.764] (II) libinput: USB USB Keykoard: needs a virtual subdevice
[    68.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0004/input/input16/event7"
[    68.764] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: MOUSE, id 11)
[    68.764] (**) Option "AccelerationScheme" "none"
[    68.765] (**) USB USB Keykoard: (accel) selected scheme none/0
[    68.765] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    68.765] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    68.765] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[    68.765] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[    68.767] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    68.767] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    68.767] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    68.767] (**) USB USB Keykoard: always reports core events
[    68.767] (**) Option "Device" "/dev/input/event7"
[    68.767] (**) Option "_source" "_driver/libinput"
[    68.767] (II) libinput: USB USB Keykoard: is a virtual subdevice
[    68.767] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0004/input/input16/event7"
[    68.767] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 16)
[    68.767] (**) Option "xkb_model" "pc105"
[    68.767] (**) Option "xkb_layout" "us"
[    68.767] (WW) Option "xkb_variant" requires a string value
[    68.767] (WW) Option "xkb_options" requires a string value
[    80.576] (II) config/udev: removing device USB USB Keykoard
[    80.592] (II) UnloadModule: "libinput"
[    80.623] (II) config/udev: removing device USB USB Keykoard
[    80.624] (II) UnloadModule: "libinput"
[    80.624] (II) config/udev: removing device USB USB Keykoard
[    80.636] (II) UnloadModule: "libinput"
[    81.737] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event6)
[    81.737] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    81.737] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    81.737] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    81.737] (**) USB USB Keykoard: always reports core events
[    81.737] (**) Option "Device" "/dev/input/event6"
[    81.737] (**) Option "_source" "server/udev"
[    81.738] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[    81.738] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[    81.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1A2C:0023.0005/input/input17/event6"
[    81.748] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 10)
[    81.748] (**) Option "xkb_model" "pc105"
[    81.748] (**) Option "xkb_layout" "us"
[    81.748] (WW) Option "xkb_variant" requires a string value
[    81.748] (WW) Option "xkb_options" requires a string value
[    81.749] (II) input device 'USB USB Keykoard', /dev/input/event6 is tagged by udev as: Keyboard
[    81.749] (II) input device 'USB USB Keykoard', /dev/input/event6 is a keyboard
[    81.752] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event7)
[    81.752] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    81.752] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    81.752] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    81.752] (**) USB USB Keykoard: always reports core events
[    81.752] (**) Option "Device" "/dev/input/event7"
[    81.752] (**) Option "_source" "server/udev"
[    81.753] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[    81.753] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[    81.764] (II) libinput: USB USB Keykoard: needs a virtual subdevice
[    81.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0006/input/input18/event7"
[    81.764] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: MOUSE, id 11)
[    81.764] (**) Option "AccelerationScheme" "none"
[    81.764] (**) USB USB Keykoard: (accel) selected scheme none/0
[    81.764] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[    81.764] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[    81.765] (II) input device 'USB USB Keykoard', /dev/input/event7 is tagged by udev as: Keyboard
[    81.765] (II) input device 'USB USB Keykoard', /dev/input/event7 is a keyboard
[    81.765] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    81.765] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[    81.765] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[    81.765] (**) USB USB Keykoard: always reports core events
[    81.765] (**) Option "Device" "/dev/input/event7"
[    81.765] (**) Option "_source" "_driver/libinput"
[    81.765] (II) libinput: USB USB Keykoard: is a virtual subdevice
[    81.766] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:1A2C:0023.0006/input/input18/event7"
[    81.766] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 16)
[    81.766] (**) Option "xkb_model" "pc105"
[    81.766] (**) Option "xkb_layout" "us"
[    81.766] (WW) Option "xkb_variant" requires a string value
[    81.766] (WW) Option "xkb_options" requires a string value
[   435.063] (EE) libinput bug: invalid tap event when fingers are up
[   534.058] (EE) libinput bug: invalid tap event when fingers are up
[   576.814] (EE) libinput bug: invalid tap event when fingers are up
[   584.024] (EE) libinput bug: invalid tap event when fingers are up
[   700.175] (EE) libinput bug: invalid tap event when fingers are up
[   700.295] (EE) libinput bug: invalid tap event when fingers are up
[   700.307] (EE) libinput bug: invalid tap event when fingers are up
[   724.826] (EE) libinput bug: invalid tap event when fingers are up
[   733.453] (EE) libinput bug: invalid tap event when fingers are up
[   772.170] (II) Axis 0x1 value 1189 is outside expected range [1233, 5076]
See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details
[   798.134] (EE) libinput bug: invalid tap event when fingers are up
[   798.146] (EE) libinput bug: invalid tap event when fingers are up
[   801.231] (EE) libinput bug: invalid tap event when fingers are up
[   941.954] (EE) libinput bug: invalid tap event when fingers are up
[   970.030] (EE) libinput bug: invalid tap event when fingers are up

Код: Выделить всё

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-390
PMMethod=bbswitch
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-390:/usr/lib32/nvidia-390
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-390/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Код: Выделить всё

Section "Screen"
Identifier "Default Screen"
Device "DiscreteNvidia"
EndSection

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.  # BusID "PCI01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Код: Выделить всё

lsmod
Module                  Size  Used by
nvidia              14352384  0
rfcomm                 69632  14
bnep                   20480  2
bbswitch               16384  0
btusb                  45056  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
btintel                16384  1 btusb
snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    90112  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
bluetooth             520192  39 bnep,btbcm,btrtl,btusb,rfcomm,btintel
snd_hda_intel          40960  3
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
binfmt_misc            20480  1
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
snd_hda_core           77824  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
ghash_clmulni_intel    16384  0
snd_hwdep              16384  1 snd_hda_codec
cryptd                 20480  1 ghash_clmulni_intel
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
uvcvideo               90112  0
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         28672  1 uvcvideo
videobuf2_core         36864  2 uvcvideo,videobuf2_v4l2
v4l2_common            16384  1 videobuf2_v4l2
snd_seq_midi           16384  0
serio_raw              16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
joydev                 20480  0
input_leds             16384  0
videodev              180224  4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
media                  24576  2 uvcvideo,videodev
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
wl                   6447104  0
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
lpc_ich                24576  0
cfg80211              565248  1 wl
snd                    81920  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
ipmi_msghandler        49152  1 nvidia
soundcore              16384  1 snd
shpchp                 36864  0
ideapad_laptop         28672  0
sparse_keymap          16384  1 ideapad_laptop
wmi                    20480  1 ideapad_laptop
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
btrfs                 991232  0
xor                    24576  1 btrfs
raid6_pq              102400  1 btrfs
dm_mirror              24576  0
dm_region_hash         24576  1 dm_mirror
dm_log                 20480  2 dm_region_hash,dm_mirror
uas                    24576  0
usb_storage            69632  1 uas
hid_generic            16384  0
usbhid                 49152  0
hid                   122880  2 hid_generic,usbhid
i915                 1232896  5
i2c_algo_bit           16384  1 i915
drm_kms_helper        155648  1 i915
psmouse               131072  0
ahci                   36864  5
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
libahci                32768  1 ahci
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   364544  7 i915,drm_kms_helper
alx                    36864  0
mdio                   16384  1 alx
video                  40960  2 i915,ideapad_laptop
fjes                   28672  0

Код: Выделить всё

sheriff@sheriff-Lenovo-G580 ~ $ inxi -G
Graphics:  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Card-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M]
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.00hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile
           GLX Version: 3.0 Mesa 17.2.8
optirun -vvv glxgears
[ 421.570485] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 421.571016] [INFO]Configured driver: nvidia
[ 421.571323] [DEBUG]optirun version 3.2.1 starting...
[ 421.571347] [DEBUG]Active configuration:
[ 421.571356] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 421.571365] [DEBUG] X display: :8
[ 421.571372] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-390:/usr/lib32/nvidia-390
[ 421.571381] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 421.571389] [DEBUG] Accel/display bridge: auto
[ 421.571397] [DEBUG] VGL Compression: proxy
[ 421.571404] [DEBUG] VGLrun extra options:
[ 421.571412] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 421.571492] [DEBUG]Using auto-detected bridge virtualgl
[ 449.784326] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 449.784346] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 449.784352] [DEBUG]Socket closed.
[ 449.784373] [ERROR]Aborting because fallback start is disabled.
[ 449.784378] [DEBUG]Killing all remaining processes.

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 31 май 2018, 06:50

sheriff писал(а):
30 май 2018, 19:04
перепробовал ядра
Какие ядра пробовал, откуда ставил?


sheriff
Сообщения: 10
Зарегистрирован: 29 авг 2017, 06:02
Поблагодарили: 1 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение sheriff » 31 май 2018, 08:22

4.4, 4.8, 4.10, 4.15 ставил из "обновления ядер", а еще 3.8

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 31 май 2018, 19:03

sheriff писал(а):
30 май 2018, 19:04
Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
У меня такая же трабла была (на GeForce 840M), решилась только обновлением ядра до 4.15. С той лишь разницей, что ставил mainline-ядро через UKUU Ubuntu Kernel Upgrade Utility Так что могу предложить только поиграться ядрами. Чем они принципиально различаются так и не выяснил, но они разные даже по нумерации
mainline.png
штатное.png
~ $ optirun -vvv glxgears
[ 7482.605096] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 7482.605352] [INFO]Configured driver: nvidia
[ 7482.605563] [DEBUG]optirun version 3.2.1 starting...
[ 7482.605580] [DEBUG]Active configuration:
[ 7482.605589] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 7482.605596] [DEBUG] X display: :8
[ 7482.605605] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-390:/usr/lib32/nvidia-390
[ 7482.605611] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 7482.605617] [DEBUG] Accel/display bridge: auto
[ 7482.605622] [DEBUG] VGL Compression: proxy
[ 7482.605632] [DEBUG] VGLrun extra options:
[ 7482.605641] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 7482.605729] [DEBUG]Using auto-detected bridge virtualgl
[ 7483.702525] [INFO]Response: Yes. X is active.

[ 7483.702543] [INFO]Running application using virtualgl.
[ 7483.702671] [DEBUG]Process vglrun started, PID 20234.
3655 frames in 5.0 seconds = 730.937 FPS
3678 frames in 5.0 seconds = 735.586 FPS
3626 frames in 5.0 seconds = 725.100 FPS
[VGL] ERROR: in readback--
[VGL] 256: Window has been deleted by window manager
[ 7500.011774] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 7500.011802] [DEBUG]Socket closed.
[ 7500.011834] [DEBUG]Killing all remaining processes.
Здесь про твой баг пишут https://wayland.freedesktop.org/libinpu ... anges.html
У вас нет необходимых прав для просмотра вложений в этом сообщении.


sheriff
Сообщения: 10
Зарегистрирован: 29 авг 2017, 06:02
Поблагодарили: 1 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение sheriff » 31 май 2018, 19:17

там про тачпад пишут, а у меня ошибка модуля mouse это фигня причина не в нем это просто оптиран такое выдает, а вот почему иксы падают я понять не могу, и еще после оптиран bbswitch пишет что карточка on и выключить ее никак не получается только ребут

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 31 май 2018, 20:55

sheriff писал(а):
31 май 2018, 19:17
после оптиран bbswitch пишет что карточка on и выключить ее никак не получается только ребут
ну у меня также было.
тачпад это тоже своего рода mouse
иксы падают из-за libinput (значения тачпада не попадают в диапазон координат ядра), насколько я понял..


sheriff
Сообщения: 10
Зарегистрирован: 29 авг 2017, 06:02
Поблагодарили: 1 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение sheriff » 01 июн 2018, 05:36

Так покажи что ты поправил а то я что то не соображу, выложи файл с координатами и путь где создавал его плз

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 04 июн 2018, 17:32

sheriff писал(а):
01 июн 2018, 05:36
Так покажи что ты поправил а то я что то не соображу, выложи файл с координатами и путь где создавал
Я же говорил, ничего не правил (вернее всё что я правил ничего не помогало). Обновил ядро до 4.15 (в нем что-то подправили и ошибка эта [XORG] (EE) Failed to load module "mouse" (module does not exist, 0) исчезла сама собой) и бамблби заработал на моём железе


sheriff
Сообщения: 10
Зарегистрирован: 29 авг 2017, 06:02
Поблагодарили: 1 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение sheriff » 06 июн 2018, 15:22

Нифига не работает, что сделать чтоб работало я не понимаю, пробую драйвера нвидиа с офф сайта, но с ними не могу побороть крах цинамона, Максимум чего Я добился это появления ошибки "failed to initiate mode change". Народ есть идеи у кого?? Поделитесь разными вариантами xorg.conf.nvidia, я думаю проблема в настройках именно его

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 06 июн 2018, 17:40

sheriff писал(а):
06 июн 2018, 15:22
Поделитесь разными вариантами xorg.conf.nvidia, я думаю проблема в настройках именно его
У меня такой
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection

Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"

# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"

# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"

Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Попробуй раскомментировать BusID
sheriff писал(а):
06 июн 2018, 15:22
Народ есть идеи у кого??
Альтернативный вариант пробовал? Как уже предлагал кому-то, выдели раздел и поставь Manjaro в режиме (для новичков) с проп. драйверами, тот на автомате установит и настроит всё что надо. Если не заработает, дальше можешь не стараться - меняй железо. Ну или пробуй достучаться до разрабов ядра, ссылку давал уже..

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 07 июл 2018, 16:42

Вот те раз..
~$ sudo add-apt-repository ppa:bumblebee/testing -y
HTTP Error 404: Not Found
Не удаётся добавить PPA: «'Данный PPA не поддерживает bionic'».

Как же все-таки добавить этот PPA в LM19?

Аватара пользователя

Автор темы
Chocobo
Сообщения: 8575
Зарегистрирован: 27 авг 2016, 19:57
Решено: 188
Откуда: НН
Благодарил (а): 576 раз
Поблагодарили: 2342 раза

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение Chocobo » 07 июл 2018, 16:47

AlexZ, можешь попробовать добавить от xenial, как говорил в соседней теме - версия не менялась уже N-лет все равно
Изображение
   
Изображение

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 07 июл 2018, 19:05

Chocobo писал(а):
07 июл 2018, 16:47
как говорил в соседней теме
а где эта тема? не могу найти..

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 08 июл 2018, 11:39

Chocobo, добавил PPA от xenial, вот картинки..
PPA.png
ключи.png
но ошибки не закончились..
Во-первых, не задействует GL по умолчанию:

Код: Выделить всё

alex@TravelMate-P276-MG:~$ sudo update-alternatives --set i386-linux-gnu_gl_conf /usr/lib/i386-linux-gnu/mesa/ld.so.conf
update-alternatives: ошибка: нет альтернатив для i386-linux-gnu_gl_conf
alex@TravelMate-P276-MG:~$ sudo update-alternatives --set x86_64-linux-gnu_egl_conf /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
update-alternatives: ошибка: нет альтернатив для x86_64-linux-gnu_egl_conf
alex@TravelMate-P276-MG:~$ sudo update-alternatives --set x86_64-linux-gnu_gl_conf /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
update-alternatives: ошибка: нет альтернатив для x86_64-linux-gnu_gl_conf
Во-вторых, после перезагрузки (с присутствием краха DE) не реагирует на эту команду:

Код: Выделить всё

alex@TravelMate-P276-MG:~$ sudo dpkg-reconfigure nvidia-390
alex@TravelMate-P276-MG:~$ 
Есть какие мысли по этому поводу?
У вас нет необходимых прав для просмотра вложений в этом сообщении.

Аватара пользователя

darkfenix
Сообщения: 3257
Зарегистрирован: 27 июн 2017, 10:36
Решено: 37
Откуда: Нижний Тагил
Благодарил (а): 213 раз
Поблагодарили: 556 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение darkfenix » 08 июл 2018, 16:33

AlexZ писал(а):
08 июл 2018, 11:39
Есть какие мысли по этому поводу?
Пчелка давно не обновлялась. Библиотеки обновились. Как следствие появились новые проблемы и/или старые стали нерешаемы(ну или почти не решаемы)
Изображение

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 08 июл 2018, 17:14

darkfenix писал(а):
08 июл 2018, 16:33
Пчелка давно не обновлялась. Библиотеки обновились
Ну эт понятно, как уже говорил, в манжарике версия та же 3.2.1 а либы ещё новее. Однако ж работает..
Видимо остается только ждать, когда здесь появится bionic https://launchpad.net/~bumblebee/%2Barc ... tu/testing
И появится ли вообще.. :dntnw:

Аватара пользователя

darkfenix
Сообщения: 3257
Зарегистрирован: 27 июн 2017, 10:36
Решено: 37
Откуда: Нижний Тагил
Благодарил (а): 213 раз
Поблагодарили: 556 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение darkfenix » 08 июл 2018, 17:33

AlexZ писал(а):
08 июл 2018, 17:14
в манжарике версия та же 3.2.1 а либы ещё новее
Вот только там, возможно, разрабы дистра поколдовали над тем чтоб оно работало
Изображение

Аватара пользователя

AlexZ
Сообщения: 600
Зарегистрирован: 06 янв 2018, 18:06
Решено: 1
Благодарил (а): 83 раза
Поблагодарили: 38 раз

Bumblebee (Nvidia + Intel) в Linux Mint 18.X

Сообщение AlexZ » 08 июл 2018, 17:51

darkfenix писал(а):
08 июл 2018, 17:33
там, возможно, разрабы дистра поколдовали над тем чтоб оно работало
Вывод? Для тех кто юзает бамблби оставаться на LM 18.3..
пока Luca Boccassi или ещё кто не наколдует его для bionic

Вернуться в «Видеокарты»