Systemd-analyze plot - делимся, сравниваем...

[Zondek]

]а что подкрутил?

Нашел старую статью про утилиту readahead. Обновил ей кеш (через редактирование GRUB).
Но меня результат мало радует, если честно. На фоне 3 минут, нужных для загрузки userspace, сэкономленные 6 секунд загрузки ядра - это капля в море. :(

[Zondek]

что ядро грузится за 6 с хвостиком секунд.

Все равно много. Должно быть около 2-3 секунды.

Ну, у меня не Core I7, а всего лишь T2250 на Yonah да и память только DDR2. Так что 6 секунд, думаю, норм. Что с userspace делать, ума не приложу.. :(

[Griga211]

Что с userspace делать, ума не приложу.. :(

у тебя 2 больших затыка. Нужна информация dmesg, smart диска, и bootchart из этой темы.
И ещё, отключи файфай физической кнопкой, отключи все устройства от ноута, убери quiet splash и попробуй перезагрузиться. Во время загрузки смотри на каких пунктах будет останавливаться больше 3-5 секунд.

[Obamacyborg1975]

ядра исторически стоковые убунтовые.

Значит убунтовцы что то туда напихали. Что то из серии "user friendly". Я повторюсь. С Дебианом таких проблем никогда не было. Даже с старым, как говно мамонта, ядром 3.16.

[Chocobo]

Obamacyborg1975, то, что убунтовое ядро априори жирней дебианьего - оно понятно) В то же время на сегодня можно сказать чуть иначе - ядро дебиан анстейбл, убунтовцы (вместе с разрабами дебиан конечно) собирают и обкатывают, чтоб забрать срез тестинга себе в релиз. Обвешивают restricted модулями и всякими лайвпатчами)

Ну а разницу при желании можно для начала прикинуть по бутчарту - он делит и те вызовы, в отличии от sd-analyze. Скорей всего какой-нибудь железки модуль висит на ините.

[FreeStyler]

Нашел старую статью про утилиту readahead. Обновил ей кеш (через редактирование GRUB).

спасибо, покурю.
Ну 6 секунд это уже хотя бы близко к современным компам.
Кстати, что-то на SVG не видно сколько занимает nss-lookup.target, как я понимаю он один из самых долгих. Лучше уж по-моему systemd-analyze blame - там сразу видно сколько. Ну и nss-lookup.target - это как я нагуглил "Host and Network Name Lookups" - может что-то в сети ищет, попробовать отключить сетевые карты.

[Griga211]

Кстати, что-то на SVG не видно сколько занимает nss-lookup.target, как я понимаю он один из самых долгих.

Он не долгий, этот процесс определяет сетевые интерфейсы. Загрузка не продолжается пока интерфейсы не будут найдены. Я попросил его уже отключить вайфай модуль физически кнопочкой, подозреваю именно дело в нем, дальше еще у него пульса моросит, а так же еще какой то косяк с монтированием разделов, возможно бэды, возможно просто нтфс монтируется какой то... Надо смотреть, но видимо автору пока это не важно.

[Griga211]

Кстати, нашел я косяк у себя с загрузкой. Теперь так. Пока ковырялся с основной проблемой, что то сделал с ядром(
https://svgshare.com/i/9_r.svg
Тут игрался с виртуалочками и забыл вырезать, надо подчистить, libvirtd покоя не дает(

[Obamacyborg1975]

Ну а разницу при желании можно для начала прикинуть по бутчарту - он делит и те вызовы, в отличии от sd-analyze. Скорей всего какой-нибудь железки модуль висит на ините.

Спасибо. Когда будет время, опробую на свободной железке.

[Zondek]

Слаб я духом оказался. Решил не искать проблему, а просто переустановить систему. Забекапил все нужное, переставил, немного оптимизировал и вуаля - 12 секунд (6,8 + 5,5).
Теперь доволен как слон.
===
Startup finished in 6.854s (kernel) + 5.508s (userspace) = 12.363s
graphical.target reached after 5.461s in userspace
===
Мой plot на Яндекс.Диск

[BrunoD]

Добрый вечер! Помогите, пожалуйста, решить проблему с медленной загрузкой Линукс Минт 18.3.
https://svgshare.com/i/A6L.svg

winner@winner-Aspire-7738G ~ $ systemd-analyze
Startup finished in 14.898s (kernel) + 3min 3.420s (userspace) = 3min 18.318s

winner@winner-Aspire-7738G ~ $ inxi -Fxz
System: Host: winner-Aspire-7738G Kernel: 4.13.0-45-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.3 Sylvia
Machine: System: Acer (portable) product: Aspire 7738G v: 0100
Mobo: Acer model: JM70 v: Rev Bios: Phoenix v: V2.12 date: 09/18/2009
CPU: Dual core Intel Core2 Duo P8400 (-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 9043
clock speeds: max: 2267 MHz 1: 1473 MHz 2: 1287 MHz
Graphics: Card: NVIDIA G96M [GeForce GT 130M] bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1600x900@60.08hz
GLX Renderer: GeForce GT 130M/PCIe/SSE2
GLX Version: 3.3.0 NVIDIA 340.104 Direct Rendering: Yes
Audio: Card Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.13.0-45-generic
Network: Card-1: Broadcom NetLink BCM5784M Gigabit Ethernet PCIe
driver: tg3 v: 3.137 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Intel WiFi Link 5100 driver: iwlwifi bus-ID: 03:00.0
IF: wlp3s0 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (13.6% used) ID-1: /dev/sda model: WDC_WD5000BEVT size: 500.1GB
Partition: ID-1: / size: 158G used: 64G (43%) fs: ext4 dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 55.0C mobo: 54.0C gpu: 0.0:55C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 176 Uptime: 15 min Memory: 1421.8/3941.0MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0 Client: Shell (bash 4.3.481) inxi: 2.2.35
winner@winner-Aspire-7738G ~ $

winner@winner-Aspire-7738G ~ $ systemd-analyze blame
18.226s dev-sda6.device
17.374s lvm2-monitor.service
13.902s systemd-udevd.service
7.940s ntp.service
7.353s NetworkManager-wait-online.service
1.882s keyboard-setup.service
1.517s systemd-modules-load.service
1.502s ModemManager.service
1.418s NetworkManager.service
1.363s lightdm.service
1.330s systemd-tmpfiles-setup-dev.service
1.283s accounts-daemon.service
1.186s gpu-manager.service
1.158s systemd-remount-fs.service
1.060s dev-hugepages.mount
1.059s dev-mqueue.mount
1.054s sys-kernel-debug.mount
1.047s upower.service
1.039s systemd-journald.service
910ms avahi-daemon.service
909ms grub-common.service
662ms networking.service
638ms console-setup.service
563ms apport.service
505ms apparmor.service
483ms udisks2.service
451ms systemd-update-utmp.service
447ms kmod-static-nodes.service
420ms ufw.service
413ms lm-sensors.service
406ms cpufrequtils.service
398ms binfmt-support.service
350ms systemd-random-seed.service
349ms loadcpufreq.service
306ms irqbalance.service
286ms colord.service
267ms systemd-tmpfiles-setup.service
183ms systemd-logind.service
181ms polkitd.service
166ms systemd-journal-flush.service
143ms console-kit-log-system-start.service
125ms systemd-udev-trigger.service
123ms rsyslog.service
123ms speech-dispatcher.service
120ms ondemand.service
111ms systemd-sysctl.service
86ms alsa-restore.service
85ms iio-sensor-proxy.service
84ms thermald.service
76ms wpa_supplicant.service
74ms systemd-user-sessions.service
71ms user@1000.service
65ms teamviewerd.service
46ms systemd-tmpfiles-clean.service
45ms pppd-dns.service
40ms setvtrgb.service
33ms plymouth-read-write.service
26ms hddtemp.service
17ms plymouth-start.service
14ms dns-clean.service
10ms rc-local.service
10ms systemd-update-utmp-runlevel.service
8ms ureadahead-stop.service
6ms systemd-backlight@backlight:acpi_video0.service
6ms proc-sys-fs-binfmt_misc.mount
6ms rtkit-daemon.service
4ms sys-kernel-config.mount
4ms resolvconf.service
3ms sys-fs-fuse-connections.mount
3ms plymouth-quit-wait.service
3ms openvpn.service
3ms systemd-rfkill.service
lines 27-72/72 (END)

Если нужна какая-либо дополнительная информация, то сообщите.

[Unborn]

Помогите, пожалуйста, решить проблему с медленной загрузкой Линукс Минт 18.3.

Да здесь нет проблемы. Для такого металлолома -

Machine: System: Acer (portable) product: Aspire 7738G v: 0100
Mobo: Acer model: JM70 v: Rev Bios: Phoenix v: V2.12 date: 09/18/2009
CPU: Dual core Intel Core2 Duo P8400 (-MCP-) cache: 3072 KB

WDC_WD5000BEVT size: 500.1GB

Эти сата2 в ноутах медленнее старых десктопных ата100 барракуд с 7200об/мин.
СМАРТ диска посмотри. Ненужные сервисы выключи и всё.
А в своё время неплохой ноут был. С Вистой либо продавался или с Вин7 уже. Дешманский ССД небольшого объёма купи и установи на него ОС и своп.
И ОС на него лучше х32. х64 со второго поколения ЦП интел начинает уже именно работать.

[BrunoD]

Спасибо за ответ, Unborn! Согласен, что металлолом и покупал его с Вистой в 2009 году. Но, Минт 17.3 64бит Синнамон на этом ноуте почти три года работал и таких тормозов при загрузке никогда не было, стартовал раза в три быстрее Винды. Рядом стоит Вин 10 64бит так в три раза быстрее стартует, чем только установленный Минт 18.3. В сторону SSD я уже смотрю. Может, подскажите какие сервисы можно выключить?

[Griga211]

Согласен, чтоj металлолом

Вполне еще работоспособное железо.

В сторону SSD я уже смотрю

Надо не смотреть, а надо брать. В России на 120 Гб меньше 2к стоят. С Китая от 900р, правда придется подождать пока придет.

Может, подскажите какие сервисы можно выключить?

Сделай hw-probe. Логи бы посмотреть и смарт диска. В пробе все будет. Очень уж долго ядро грузится, нужен dmesg, опять в пробе он будет... systemd-udev.service как слушает ядро. Думаю у тебя на пк вряд ли найдутся логические диски, поэтому убить службу lvm, так же wait-online

[BrunoD]

Спасибо, Griga211, за ответ. В моем сообщении №391 я вложил несколько отчетов, может там есть информация, нужная для Вас?
Здесь вывод dmesg:

winner@winner-Aspire-7738G ~ $ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[ 0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic root=UUID=50dac03b-fa2a-4fa8-b2f8-bd931c7b3a74 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9cefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9cf000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb08fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb09000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd5efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd5f000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde1000-0x00000000bfdfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Acer Aspire 7738G /JM70 , BIOS V2.12 09/18/2009
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-D7FFF uncachable
[ 0.000000] D8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6d40-0x000f6d4f] mapped at [ffff958a000f6d40]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff958a00099000] 99000 size 24576
[ 0.000000] BRK [0x2e32c000, 0x2e32cfff] PGTABLE
[ 0.000000] BRK [0x2e32d000, 0x2e32dfff] PGTABLE
[ 0.000000] BRK [0x2e32e000, 0x2e32efff] PGTABLE
[ 0.000000] BRK [0x2e32f000, 0x2e32ffff] PGTABLE
[ 0.000000] BRK [0x2e330000, 0x2e330fff] PGTABLE
[ 0.000000] BRK [0x2e331000, 0x2e331fff] PGTABLE
[ 0.000000] BRK [0x2e332000, 0x2e332fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31adb000-0x34d64fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6BA0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BFDF3650 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFDE3000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BFDE4000 00B53A (v02 Intel CANTIGA 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000BFD9DFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BFD9DFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 0x00000000BFDFEDFA 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 0x00000000BFDFEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFDFEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFDE2000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf8a0fff]
[ 0.000000] node 0: [mem 0x00000000bf8a7000-0x00000000bf9cefff]
[ 0.000000] node 0: [mem 0x00000000bfa0f000-0x00000000bfb08fff]
[ 0.000000] node 0: [mem 0x00000000bfd0f000-0x00000000bfd17fff]
[ 0.000000] node 0: [mem 0x00000000bfd1f000-0x00000000bfd5efff]
[ 0.000000] node 0: [mem 0x00000000bfd9f000-0x00000000bfde0fff]
[ 0.000000] node 0: [mem 0x00000000bfdff000-0x00000000bfdfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1047277
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12206 pages used for memmap
[ 0.000000] DMA32 zone: 781135 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf9cf000-0xbfa0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb09000-0xbfd0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd5f000-0xbfd9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfde1000-0xbfdfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xffffffff]
[ 0.000000] e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff958b3fc00000 s146584 r8192 d29544 u1048576
[ 0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic root=UUID=50dac03b-fa2a-4fa8-b2f8-bd931c7b3a74 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3979308K/4189108K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 209800K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37875 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2260.976 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.95 BogoMIPS (lpj=9043904)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.013739] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.013795] Security Framework initialized
[ 0.013797] Yama: becoming mindful.
[ 0.013833] AppArmor: AppArmor initialized
[ 0.016773] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018595] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.018675] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018735] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019257] FEATURE SPEC_CTRL Not Present
[ 0.019261] CPU: Physical Processor ID: 0
[ 0.019263] CPU: Processor Core ID: 0
[ 0.019266] mce: CPU supports 6 MCE banks
[ 0.019279] CPU0: Thermal monitoring enabled (TM1)
[ 0.019285] process: using mwait in idle threads
[ 0.019293] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.019295] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.019299] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.019301] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[ 0.019303] Speculative Store Bypass: Vulnerable
[ 0.019584] Freeing SMP alternatives memory: 36K
[ 0.024202] smpboot: Max logical packages: 1
[ 0.024672] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068000] APIC calibration not consistent with PM-Timer: 291ms instead of 100ms
[ 0.068000] APIC delta adjusted to PM-Timer: 1662496 (4854431)
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] Hierarchical SRCU implementation.
[ 0.068000] smp: Bringing up secondary CPUs ...
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.076084] smp: Brought up 1 node, 2 CPUs
[ 0.076084] smpboot: Total of 2 processors activated (9043.90 BogoMIPS)
[ 0.076143] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080447] devtmpfs: initialized
[ 0.080447] x86/mm: Memory block size: 128MB
[ 0.081254] evm: security.selinux
[ 0.081256] evm: security.SMACK64
[ 0.081257] evm: security.SMACK64EXEC
[ 0.081258] evm: security.SMACK64TRANSMUTE
[ 0.081260] evm: security.SMACK64MMAP
[ 0.081261] evm: security.ima
[ 0.081263] evm: security.capability
[ 0.081388] PM: Registering ACPI NVS region [mem 0xbfd5f000-0xbfd9efff] (262144 bytes)
[ 0.081507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.081518] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.081635] pinctrl core: initialized pinctrl subsystem
[ 0.081836] RTC time: 14:21:25, date: 12/23/18
[ 0.082020] NET: Registered protocol family 16
[ 0.082477] cpuidle: using governor ladder
[ 0.082477] cpuidle: using governor menu
[ 0.082477] PCCT header not found.
[ 0.082477] Simple Boot Flag at 0x57 set to 0x1
[ 0.082477] ACPI: bus type PCI registered
[ 0.082477] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.082477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.084010] PCI: not using MMCONFIG
[ 0.084013] PCI: Using configuration type 1 for base access
[ 0.084280] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.084282] mtrr: probably your BIOS does not setup all CPUs.
[ 0.084283] mtrr: corrected configuration.
[ 0.087092] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.088108] ACPI: Added _OSI(Module Device)
[ 0.088111] ACPI: Added _OSI(Processor Device)
[ 0.088113] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088115] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.094450] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.095601] ACPI: Dynamic OEM Table Load:
[ 0.095613] ACPI: SSDT 0xFFFF958B3A557800 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.096061] ACPI: Dynamic OEM Table Load:
[ 0.096078] ACPI: SSDT 0xFFFF958B3A558800 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.096917] ACPI: Dynamic OEM Table Load:
[ 0.096927] ACPI: SSDT 0xFFFF958B3A5B9C00 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.097181] ACPI: Dynamic OEM Table Load:
[ 0.097181] ACPI: SSDT 0xFFFF958B3A5620C0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.097181] ACPI: EC: EC started
[ 0.097181] ACPI: EC: interrupt blocked
[ 0.130323] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.130328] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.130331] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.130333] ACPI: Interpreter enabled
[ 0.130372] ACPI: (supports S0 S3 S4 S5)
[ 0.130375] ACPI: Using IOAPIC for interrupt routing
[ 0.130431] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.131927] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.131954] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.132283] ACPI: GPE 0x01 active on init
[ 0.132381] ACPI: Enabled 13 GPEs in block 00 to 3F
[ 0.988073] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.988084] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.988094] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.989031] PCI host bridge to bus 0000:00
[ 0.989037] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.989040] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.989044] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.989048] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.989051] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.989054] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.989058] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.989061] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.989065] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.989083] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.989132] DMAR: Forcing write-buffer flush capability
[ 0.989133] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.989307] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.989391] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.989614] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.989706] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
[ 0.989947] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.990016] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
[ 0.990261] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.990295] pci 0000:00:1a.7: reg 0x10: [mem 0xf3404800-0xf3404bff]
[ 0.990421] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.990607] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.990641] pci 0000:00:1b.0: reg 0x10: [mem 0xf3400000-0xf3403fff 64bit]
[ 0.990756] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.990939] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.991060] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.991250] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.991370] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.991559] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.991680] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.991875] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.991964] pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f]
[ 0.992204] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.992273] pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f]
[ 0.992503] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.992593] pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f]
[ 0.992830] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.992899] pci 0000:00:1d.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.993131] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.993164] pci 0000:00:1d.7: reg 0x10: [mem 0xf3404c00-0xf3404fff]
[ 0.993290] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.993462] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.993713] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.994015] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.994045] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
[ 0.994058] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
[ 0.994071] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
[ 0.994084] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
[ 0.994097] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.994110] pci 0000:00:1f.2: reg 0x24: [mem 0xf3404000-0xf34047ff]
[ 0.994179] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.994346] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.994376] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.994409] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.994756] pci 0000:01:00.0: [10de:0652] type 00 class 0x030000
[ 0.994879] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.994969] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.995052] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit]
[ 0.995110] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.995168] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 1.004055] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.004061] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.004066] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 1.004073] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.004356] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000
[ 1.004407] pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
[ 1.004608] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 1.016186] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.016195] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 1.016333] pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
[ 1.016395] pci 0000:03:00.0: reg 0x10: [mem 0xf3100000-0xf3101fff 64bit]
[ 1.016610] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.028035] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.028045] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.028172] acpiphp: Slot [1] registered
[ 1.028182] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[ 1.028188] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 1.028194] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 1.028203] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 1.028322] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 1.028337] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 1.028341] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.028345] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.028348] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 1.028352] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 1.028355] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 1.028359] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 1.028362] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 1.444175] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 1.444282] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 1.444386] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 1.444490] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 1.444593] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 1.444696] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 1.444800] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 1.444907] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[ 1.445362] ACPI: EC: interrupt unblocked
[ 1.445372] ACPI: EC: event unblocked
[ 1.445382] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.445386] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.445945] SCSI subsystem initialized
[ 1.445970] libata version 3.00 loaded.
[ 1.445970] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 1.445970] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.445970] pci 0000:01:00.0: vgaarb: bridge control possible
[ 1.445970] vgaarb: loaded
[ 1.445970] ACPI: bus type USB registered
[ 1.445970] usbcore: registered new interface driver usbfs
[ 1.445970] usbcore: registered new interface driver hub
[ 1.445970] usbcore: registered new device driver usb
[ 1.445970] EDAC MC: Ver: 3.0.0
[ 1.445970] PCI: Using ACPI for IRQ routing
[ 1.455582] PCI: pci_cache_line_size set to 64 bytes
[ 1.455834] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 1.455836] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 1.455840] e820: reserve RAM buffer [mem 0xbf9cf000-0xbfffffff]
[ 1.455843] e820: reserve RAM buffer [mem 0xbfb09000-0xbfffffff]
[ 1.455846] e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
[ 1.455849] e820: reserve RAM buffer [mem 0xbfd5f000-0xbfffffff]
[ 1.455852] e820: reserve RAM buffer [mem 0xbfde1000-0xbfffffff]
[ 1.455854] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 1.456056] NetLabel: Initializing
[ 1.456058] NetLabel: domain hash size = 128
[ 1.456059] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.456097] NetLabel: unlabeled traffic allowed by default
[ 1.457081] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.457093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.457102] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.460053] clocksource: Switched to clocksource hpet
[ 1.491716] VFS: Disk quotas dquot_6.6.0
[ 1.491771] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.492055] AppArmor: AppArmor Filesystem Enabled
[ 1.492186] pnp: PnP ACPI init
[ 1.492525] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.492588] pnp 00:01: Plug and Play ACPI device, IDs SYN1b22 SYN1b00 SYN0002 PNP0f13 (active)
[ 1.492829] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.492837] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.492966] system 00:03: [io 0x0480-0x048f] has been reserved
[ 1.492971] system 00:03: [io 0xffff] has been reserved
[ 1.492975] system 00:03: [io 0xffff] has been reserved
[ 1.492979] system 00:03: [io 0x0400-0x047f] has been reserved
[ 1.492983] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 1.492988] system 00:03: [io 0xfe00] has been reserved
[ 1.492992] system 00:03: [mem 0xff800000-0xff800fff] has been reserved
[ 1.492999] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.494344] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.494666] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.494671] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.494675] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.494679] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.494683] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.494687] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.494694] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.908263] pnp: PnP ACPI: found 6 devices
[ 1.916914] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.916948] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1.916955] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1.916973] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.916979] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1.917020] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 1.917032] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 1.917038] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 1.917043] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 1.917053] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff 64bit]
[ 1.917072] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 1.917077] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 1.917081] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.917085] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.917091] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 1.917097] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.917105] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.917109] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.917117] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 1.917123] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 1.917132] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.917137] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 1.917144] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.917150] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 1.917159] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[ 1.917164] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 1.917171] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 1.917177] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 1.917188] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 1.917205] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.917209] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.917213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.917216] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 1.917219] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 1.917223] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 1.917226] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 1.917230] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[ 1.917233] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.917237] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[ 1.917240] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.917244] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 1.917247] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf30fffff]
[ 1.917251] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 1.917254] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 1.917257] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 1.917260] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 1.917264] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 1.917267] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 1.917270] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 1.917274] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7 window]
[ 1.917277] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff window]
[ 1.917281] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.917284] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 1.917287] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 1.917291] pci_bus 0000:0d: resource 9 [mem 0x000e0000-0x000e3fff window]
[ 1.917294] pci_bus 0000:0d: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 1.917298] pci_bus 0000:0d: resource 11 [mem 0xf0000000-0xfebfffff window]
[ 1.917463] NET: Registered protocol family 2
[ 1.917817] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.918031] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.918342] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.918446] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.918494] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.918605] NET: Registered protocol family 1
[ 1.920864] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.921036] PCI: CLS 64 bytes, default 64
[ 1.921124] Unpacking initramfs...
[ 3.752342] Freeing initrd memory: 51752K
[ 3.752432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.752439] software IO TLB [mem 0xbb8a1000-0xbf8a1000] (64MB) mapped at [ffff958abb8a1000-ffff958abf8a0fff]
[ 3.752721] Scanning for low memory corruption every 60 seconds
[ 3.753365] audit: initializing netlink subsys (disabled)
[ 3.753513] audit: type=2000 audit(1545574888.753:1): state=initialized audit_enabled=0 res=1
[ 3.754174] Initialise system trusted keyrings
[ 3.754196] Key type blacklist registered
[ 3.754267] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 3.757750] zbud: loaded
[ 3.758890] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.759228] fuse init (API version 7.26)
[ 3.761928] Key type asymmetric registered
[ 3.761931] Asymmetric key parser 'x509' registered
[ 3.762011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.762073] io scheduler noop registered
[ 3.762075] io scheduler deadline registered
[ 3.762148] io scheduler cfq registered (default)
[ 3.763682] intel_idle: does not run on family 6 model 23
[ 3.764994] ACPI: AC Adapter [ADP1] (on-line)
[ 3.766355] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.767425] ACPI: Lid Switch [LID0]
[ 3.767522] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.767552] ACPI: Sleep Button [SLPB]
[ 3.767638] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.767662] ACPI: Power Button [PWRF]
[ 3.768247] Monitor-Mwait will be used to enter C-1 state
[ 3.768262] Monitor-Mwait will be used to enter C-2 state
[ 3.768271] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.791536] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.795744] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.795747] ACPI: Thermal Zone [TZS0] (32 C)
[ 3.805631] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.805633] ACPI: Thermal Zone [TZS1] (32 C)
[ 3.805697] GHES: HEST is not enabled!
[ 3.805924] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.818021] Linux agpgart interface v0.103
[ 3.821645] loop: module loaded
[ 3.822048] libphy: Fixed MDIO Bus: probed
[ 3.822051] tun: Universal TUN/TAP device driver, 1.6
[ 3.822139] PPP generic driver version 2.4.2
[ 3.822244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.822258] ehci-pci: EHCI PCI platform driver
[ 3.822496] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 3.822513] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.822561] ehci-pci 0000:00:1a.7: debug port 1
[ 3.826490] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 3.826518] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf3404800
[ 3.840051] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.840143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.840147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.840151] usb usb1: Product: EHCI Host Controller
[ 3.840154] usb usb1: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[ 3.840158] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.840416] hub 1-0:1.0: USB hub found
[ 3.840431] hub 1-0:1.0: 4 ports detected
[ 3.840912] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.840927] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.840944] ehci-pci 0000:00:1d.7: debug port 1
[ 3.844860] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.844883] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3404c00
[ 3.860062] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.860145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.860150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.860153] usb usb2: Product: EHCI Host Controller
[ 3.860156] usb usb2: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[ 3.860160] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.860402] hub 2-0:1.0: USB hub found
[ 3.860415] hub 2-0:1.0: 8 ports detected
[ 3.860855] ehci-platform: EHCI generic platform driver
[ 3.860882] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.860888] ohci-pci: OHCI PCI platform driver
[ 3.860915] ohci-platform: OHCI generic platform driver
[ 3.860930] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.861109] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.861119] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.861130] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.861154] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[ 3.861247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.861252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.861255] usb usb3: Product: UHCI Host Controller
[ 3.861258] usb usb3: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.861262] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.861496] hub 3-0:1.0: USB hub found
[ 3.861509] hub 3-0:1.0: 2 ports detected
[ 3.861865] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.861876] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.861885] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.861909] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[ 3.861996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.862000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.862003] usb usb4: Product: UHCI Host Controller
[ 3.862006] usb usb4: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.862010] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.862248] hub 4-0:1.0: USB hub found
[ 3.862260] hub 4-0:1.0: 2 ports detected
[ 3.862563] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.862573] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.862583] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.862606] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 3.862692] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.862696] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.862700] usb usb5: Product: UHCI Host Controller
[ 3.862703] usb usb5: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.862706] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.862917] hub 5-0:1.0: USB hub found
[ 3.862930] hub 5-0:1.0: 2 ports detected
[ 3.863225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.863235] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.863245] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.863279] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
[ 3.863361] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.863365] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.863369] usb usb6: Product: UHCI Host Controller
[ 3.863372] usb usb6: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.863376] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.863592] hub 6-0:1.0: USB hub found
[ 3.863608] hub 6-0:1.0: 2 ports detected
[ 3.863943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.863953] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.863963] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.863996] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 3.864096] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.864100] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.864103] usb usb7: Product: UHCI Host Controller
[ 3.864107] usb usb7: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.864110] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.864344] hub 7-0:1.0: USB hub found
[ 3.864357] hub 7-0:1.0: 2 ports detected
[ 3.864694] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.864709] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 3.864719] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.864743] uhci_hcd 0000:00:1d.3: irq 18, io base 0x000018a0
[ 3.864830] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.864834] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.864838] usb usb8: Product: UHCI Host Controller
[ 3.864841] usb usb8: Manufacturer: Linux 4.13.0-45-generic uhci_hcd
[ 3.864844] usb usb8: SerialNumber: 0000:00:1d.3
[ 3.865059] hub 8-0:1.0: USB hub found
[ 3.865097] hub 8-0:1.0: 2 ports detected
[ 3.865408] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.883666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.883675] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.883960] mousedev: PS/2 mouse device common for all mice
[ 3.884599] rtc_cmos 00:04: RTC can wake from S4
[ 3.884790] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.884821] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.884833] i2c /dev entries driver
[ 3.884947] device-mapper: uevent: version 1.0.3
[ 3.885111] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.885162] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.885943] NET: Registered protocol family 10
[ 3.896832] Segment Routing with IPv6
[ 3.896869] NET: Registered protocol family 17
[ 3.896885] Key type dns_resolver registered
[ 3.897245] RAS: Correctable Errors collector initialized.
[ 3.897315] microcode: sig=0x10676, pf=0x80, revision=0x60f
[ 3.897398] microcode: Microcode Update Driver: v2.2.
[ 3.897681] registered taskstats version 1
[ 3.897699] Loading compiled-in X.509 certificates
[ 3.904828] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[ 3.904863] zswap: loaded using pool lzo/zbud
[ 3.914886] Key type big_key registered
[ 3.914893] Key type trusted registered
[ 3.919783] Key type encrypted registered
[ 3.919788] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.919793] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 3.919830] evm: HMAC attrs: 0x1
[ 3.920590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.920651] Magic number: 14:74:385
[ 3.920678] usb usb3: hash matches
[ 3.920712] thermal cooling_device0: hash matches
[ 3.920868] rtc_cmos 00:04: setting system clock to 2018-12-23 14:21:29 UTC (1545574889)
[ 3.922191] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.922192] EDD information not available.
[ 3.922253] PM: Hibernation image not present or could not be loaded.
[ 3.957659] ACPI: Battery Slot [BAT0] (battery present)
[ 3.961117] Freeing unused kernel memory: 2368K
[ 3.972060] Write protecting the kernel read-only data: 18432k
[ 3.973152] Freeing unused kernel memory: 2024K
[ 3.973470] Freeing unused kernel memory: 84K
[ 3.975784] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.975785] x86/mm: Checking user space page tables
[ 3.977991] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.074091] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.094404] acpi device:02: registered as cooling_device2
[ 4.094488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 4.101316] pps_core: LinuxPPS API ver. 1 registered
[ 4.101317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.102923] PTP clock support registered
[ 4.106763] tg3.c:v3.137 (May 11, 2014)
[ 4.107167] ahci 0000:00:1f.2: version 3.0
[ 4.107363] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.107366] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[ 4.108131] scsi host0: ahci
[ 4.108254] scsi host1: ahci
[ 4.108360] scsi host2: ahci
[ 4.108469] scsi host3: ahci
[ 4.108575] scsi host4: ahci
[ 4.108681] scsi host5: ahci
[ 4.108736] ata1: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404100 irq 24
[ 4.108738] ata2: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404180 irq 24
[ 4.108739] ata3: DUMMY
[ 4.108740] ata4: DUMMY
[ 4.108742] ata5: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404300 irq 24
[ 4.108743] ata6: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404380 irq 24
[ 4.125396] tg3 0000:02:00.0 eth0: Tigon3 [partno(none) rev 5784100] (PCI Express) MAC address 00:1f:16:a7:f9:cd
[ 4.125399] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.125402] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.125404] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.154960] tg3 0000:02:00.0 enp2s0: renamed from eth0
[ 4.176038] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.325108] usb 1-1: New USB device found, idVendor=1c7a, idProduct=0801
[ 4.325110] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.325112] usb 1-1: Product: FingerPrinter Reader
[ 4.325114] usb 1-1: Manufacturer: Generic
[ 4.325115] usb 1-1: SerialNumber: 00000000000006
[ 4.328041] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 4.422868] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.422895] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.515071] usb 5-1: New USB device found, idVendor=046d, idProduct=c062
[ 4.515074] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.515076] usb 5-1: Product: USB Laser Mouse
[ 4.515077] usb 5-1: Manufacturer: Logitech
[ 4.522469] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.539333] usbcore: registered new interface driver usbhid
[ 4.539335] usbhid: USB HID core driver
[ 4.541509] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C062.0001/input/input7
[ 4.541631] hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1/input0
[ 4.584050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.584067] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.585982] ata1.00: ATA-8: WDC WD5000BEVT-22ZAT0, 01.01A01, max UDMA/133
[ 4.585984] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.586436] ata6.00: ATAPI: Slimtype BD E DS4E1S, EA16, max UDMA/100
[ 4.587797] ata6.00: configured for UDMA/100
[ 4.587969] ata1.00: configured for UDMA/133
[ 4.588167] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 1A01 PQ: 0 ANSI: 5
[ 4.620251] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.620511] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.620545] sd 0:0:0:0: [sda] Write Protect is off
[ 4.620548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.620600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.623941] scsi 5:0:0:0: CD-ROM Slimtype BD E DS4E1S EA16 PQ: 0 ANSI: 5
[ 4.660395] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/1x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 4.660397] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.660521] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.660584] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 4.713767] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 4.714748] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.764037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x209734c795c, max_idle_ns: 440795276689 ns
[ 4.927063] psmouse serio1: synaptics: queried max coordinates: x [..5650], y [..4622]
[ 4.936036] usb 2-5: new high-speed USB device number 3 using ehci-pci

И объясните, как убить службу lvm и wait-online. И как сделать smart диска?

[BrunoD]

Здесь продолжение спойлера, т.к. не поместилось

[ 5.009671] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 566527
[ 5.062738] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.140072] usb 2-5: New USB device found, idVendor=04f2, idProduct=b110
[ 5.140075] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5.140077] usb 2-5: Product: CNF7148
[ 5.140078] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 5.140080] usb 2-5: SerialNumber: SN0001
[ 7.304028] raid6: sse2x1 gen() 3711 MB/s
[ 7.352027] raid6: sse2x1 xor() 3918 MB/s
[ 7.400027] raid6: sse2x2 gen() 4130 MB/s
[ 7.448025] raid6: sse2x2 xor() 4751 MB/s
[ 7.496031] raid6: sse2x4 gen() 6754 MB/s
[ 7.544029] raid6: sse2x4 xor() 5424 MB/s
[ 7.544030] raid6: using algorithm sse2x4 gen() 6754 MB/s
[ 7.544031] raid6: .... xor() 5424 MB/s, rmw enabled
[ 7.544032] raid6: using ssse3x2 recovery algorithm
[ 7.545552] xor: measuring software checksum speed
[ 7.584025] prefetch64-sse: 9335.000 MB/sec
[ 7.624024] generic_sse: 8257.000 MB/sec
[ 7.624025] xor: using function: prefetch64-sse (9335.000 MB/sec)
[ 7.645326] Btrfs loaded, crc32c=crc32c-generic
[ 8.258904] random: crng init done
[ 13.871174] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.725020] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 15.744107] systemd[1]: Detected architecture x86-64.
[ 15.757232] systemd[1]: Set hostname to <winner-Aspire-7738G>.
[ 18.079998] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.080155] systemd[1]: Listening on Journal Socket.
[ 18.080210] systemd[1]: Listening on Syslog Socket.
[ 18.080303] systemd[1]: Listening on Journal Audit Socket.
[ 18.080348] systemd[1]: Listening on udev Kernel Socket.
[ 18.080368] systemd[1]: Reached target User and Group Name Lookups.
[ 18.080415] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.672585] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 19.620360] systemd-journald[348]: Received request to flush runtime journal from PID 1
[ 21.282931] lp: driver loaded but no devices found
[ 21.904899] ppdev: user-space parallel port driver
[ 36.806946] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 36.807488] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 36.807772] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.851052] Intel(R) Wireless WiFi driver for Linux
[ 36.851054] Copyright(c) 2003- 2015 Intel Corporation
[ 36.851231] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 36.860195] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[ 36.860204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 36.860206] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170531/utaddress-247)
[ 36.860210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 36.860211] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170531/utaddress-247)
[ 36.860215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 36.860216] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 36.934295] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 36.934298] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 36.934301] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 36.934302] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 36.934304] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 36.934306] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 36.934308] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 36.934310] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 36.934312] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 36.962685] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 36.962758] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 36.962825] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 36.985791] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 37.176418] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 37.204714] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 37.204717] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 37.204719] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 37.204721] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 37.269638] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 37.402297] nvidia: loading out-of-tree module taints kernel.
[ 37.402305] nvidia: module license 'NVIDIA' taints kernel.
[ 37.402306] Disabling lock debugging due to kernel taint
[ 37.418762] intel_powerclamp: No package C-state available
[ 37.421200] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 37.432880] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 37.433270] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 37.433278] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017
[ 37.773153] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 37.777158] acer_wmi: Function bitmap for Communication Device: 0x83
[ 37.993234] media: Linux media interface: v0.10
[ 38.000500] Linux video capture interface: v2.00
[ 38.014559] uvcvideo: Found UVC 1.00 device CNF7148 (04f2:b110)
[ 38.023094] uvcvideo 2-5:1.0: Entity type for entity Extension 5 was not initialized!
[ 38.023097] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 38.023100] uvcvideo 2-5:1.0: Entity type for entity Processing 3 was not initialized!
[ 38.023102] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 38.023707] input: CNF7148: HD Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input11
[ 38.024285] usbcore: registered new interface driver uvcvideo
[ 38.024286] USB Video Class driver (1.1.1)
[ 38.129942] audit: type=1400 audit(1545574923.709:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=713 comm="apparmor_parser"
[ 38.129947] audit: type=1400 audit(1545574923.709:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
[ 38.129950] audit: type=1400 audit(1545574923.709:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=713 comm="apparmor_parser"
[ 38.129952] audit: type=1400 audit(1545574923.709:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
[ 38.130565] audit: type=1400 audit(1545574923.709:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=712 comm="apparmor_parser"
[ 38.130569] audit: type=1400 audit(1545574923.709:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=712 comm="apparmor_parser"
[ 38.132893] audit: type=1400 audit(1545574923.712:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=715 comm="apparmor_parser"
[ 38.134537] audit: type=1400 audit(1545574923.713:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=717 comm="apparmor_parser"
[ 38.136893] audit: type=1400 audit(1545574923.716:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=719 comm="apparmor_parser"
[ 38.139804] audit: type=1400 audit(1545574923.718:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=721 comm="apparmor_parser"
[ 38.199706] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 38.386683] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 38.386686] iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled)
[ 39.042312] nvidia_uvm: Loaded the UVM driver, major device number 242
[ 39.733795] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.733849] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.733896] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.734178] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.734224] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.734269] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.734314] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.734360] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.871147] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 39.871456] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 108.381590] new mount options do not match the existing superblock, will be ignored
[ 110.309322] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 110.314889] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 110.424444] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 111.537832] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.537895] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.537945] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.538243] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.538296] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.538341] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.538385] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.538430] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.542643] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.542932] ACPI Warning: \_SB.PCI0.PEGP.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 111.997795] tg3 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex
[ 111.997797] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on for RX
[ 112.611250] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 580.304192] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 744.793623] perf: interrupt took too long (3140 > 3126), lowering kernel.perf_event_max_sample_rate to 63500
[ 1009.739484] perf: interrupt took too long (3926 > 3925), lowering kernel.perf_event_max_sample_rate to 50750
[ 1226.321168] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1226.473147] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2287.251747] Adding 6193020k swap on /dev/sda7. Priority:-1 extents:1 across:6193020k FS
[ 2499.311820] perf: interrupt took too long (4920 > 4907), lowering kernel.perf_event_max_sample_rate to 40500
[ 3671.491604] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 3678.537401] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 7675.531433] CE: hpet increased min_delta_ns to 20115 nsec
winner@winner-Aspire-7738G ~ $

[rogoznik]

BrunoD, сделай как тут и выложи ссылку, там будут все логи и смарт

[RingoRoma]

Вот на моем SSD 64 gb sata3

https://cdn1.savepice.ru/uploads/2019/2 ... e-full.png

[AlexelA]

Информативно...

[RingoRoma]

исправил новым измерением
deepin ext4 ssd 64 gb
не получается отключить сервисы печати, принтера нет