Проблема с настройкой кулеров

[Krug]

Все привет!
Решил что пора бы уже настроить кулеры на своем ноуте и следую инструкции (ссылка) приступил.
После ввода команды

Код: Выделить всё

sudo pwmconfig

выдает ошибку:

There are no pwm-capable sensor modules installed

*полный вывод команды:

# pwmconfig version 3.6.0
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

*о моем ноуте:

System:
Kernel: 5.8.0-33-generic x86_64 bits: 64 compiler: N/A
Desktop: Xfce 4.14.2 Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: ASUSTeK product: K501UQ v: 1.0 serial: <filter>
Mobo: ASUSTeK model: K501UQ v: 1.0 serial: <filter>
UEFI: American Megatrends v: K501UQ.302 date: 04/18/2019
Battery:
ID-1: BAT0 charge: 24.6 Wh condition: 24.6/48.3 Wh (51%)
model: ASUSTeK ASUS Battery status: Not charging
CPU:
Topology: Dual Core model: Intel Core i3-6100U bits: 64 type: MT MCP
arch: Skylake rev: 3 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 18399
Speed: 500 MHz min/max: 400/2300 MHz Core speeds (MHz): 1: 500 2: 500
3: 500 4: 500
Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: i915
v: kernel bus ID: 00:02.0
Device-2: NVIDIA GM107 [GeForce 940MX] vendor: ASUSTeK driver: nvidia
v: 455.38 bus ID: 01:00.0
Display: x11 server: X.Org 1.20.8 driver: modesetting,nvidia
unloaded: fbdev,nouveau,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.0.8
direct render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Sound Server: ALSA v: k5.8.0-33-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: d000 bus ID: 02:00.0
IF: enp2s0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: d000
bus ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 34.52 GiB (7.4%)
ID-1: /dev/sda vendor: Toshiba model: MQ01ABF050 size: 465.76 GiB
temp: 33 C
Partition:
ID-1: / size: 456.96 GiB used: 34.52 GiB (7.6%) fs: ext4 dev: /dev/sda2
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A
Fan Speeds (RPM): cpu: 4100
Info:
Processes: 220 Uptime: 58m Memory: 7.21 GiB used: 1.70 GiB (23.6%)
Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
inxi: 3.0.38

Ядро обновил , не помогло.
Кто знает решение , пожалуйста подскажите

[WWolf]

sensors ещё покажи

[Krug]

Вот

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +39.0°C

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +39.5°C

BAT0-acpi-0
Adapter: ACPI interface
in0: 11.40 V

asus-isa-0000
Adapter: ISA adapter
cpu_fan: 4100 RPM
temp1: +40.0°C

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +40.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +40.0°C (high = +100.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1: +40.0°C (crit = +103.0°C)

[WWolf]

ну скорее всего у тебя вещь в себе неуправляемая извне...
Управление вращением куллера на ноутбуке (Пост wanoska #15193)
там в конце есть статья на хабр, может у тебя выйдет... я после месяца красноглазия забил

[Krug]

Благодарю
Попробовал , не получилось

Попробовал еще этот способ , но тоже не получилось

This is where we get the first error that may not be obvious how to fix. What we are trying to do is to automatically have the fan speeds controlled by a sensor temperature. This can be set up using pwmconfig. When I first ran it, I got the error:

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
This can be fixed by relaxing an acpi check in the kernel (hmm), see https://hydra.geht.net/tino/howto/linux/fixes/w83627hf/ amongst others for more details. The way I fixed this is to edit /etc/default/grub to add acpi_enforce_resources=lax to the GRUB_CMDLINE_LINUX_DEFAULT giving:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_enforce_resources=lax"
Then need to update the boot configuration:

sudo update-grub
and reboot.

(ссылка)
может быть у тебя получится

Я так понимаю эта проблема будет на любом дистрибутиве линукс , а не только на убунту?