inxi -Fxz:
andrey@andrey-HP-Pavilion:~/Загрузки/libredwg-0.7.1608$ inxi -Fxz
System:
Host: andrey-HP-Pavilion Kernel: 4.15.0-45-generic x86_64 bits: 64
compiler: gcc v: 7.3.0 Desktop: Cinnamon 4.0.9
Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic
Machine:
Type: Laptop System: Hewlett-Packard
product: HP Pavilion dv6500 Notebook PC v: Rev 1 serial: <filter>
Mobo: Quanta model: 30CF v: 85.26 serial: <filter> BIOS: Hewlett-Packard
v: F.34 date: 03/22/2011
Battery:
ID-1: BAT0 charge: 14.2 Wh condition: 41.1/55.1 Wh (75%)
model: Hewlett-Packard Primary status: Charging
CPU:
Topology: Dual Core model: AMD Athlon 64 X2 TK-55 bits: 64 type: MCP
arch: K8 rev.F+ rev: 1 L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 svm bogomips: 7200
Speed: 1800 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 1800 2: 1800
Graphics:
Device-1: NVIDIA C67 [GeForce 7150M / nForce 630M] vendor: Hewlett-Packard
driver: nouveau v: kernel bus ID: 00:12.0
Display: x11 server: X.Org 1.19.6 driver: nouveau
unloaded: fbdev,modesetting,vesa resolution: 1280x800~60Hz
OpenGL: renderer: NV67 v: 2.1 Mesa 18.2.2 direct render: Yes
Audio:
Device-1: NVIDIA MCP67 High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:07.0
Sound Server: ALSA v: k4.15.0-45-generic
Network:
Device-1: NVIDIA MCP67 Ethernet vendor: Hewlett-Packard driver: forcedeth
v: kernel port: 30f8 bus ID: 00:0a.0
IF: enp0s10 state: down mac: <filter>
Device-2: Broadcom Limited BCM4311 802.11b/g WLAN vendor: Hewlett-Packard
driver: wl v: kernel port: 30f8 bus ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
Drives:
Local Storage: total: 149.05 GiB used: 11.80 GiB (7.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1637GSX size: 149.05 GiB
Partition:
ID-1: / size: 145.71 GiB used: 11.80 GiB (8.1%) fs: ext4 dev: /dev/sda1
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A gpu: nouveau temp: 64 C
Fan Speeds (RPM): N/A
Info:
Processes: 194 Uptime: 1h 05m Memory: 3.61 GiB used: 1.03 GiB (28.5%)
Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19
inxi: 3.0.27
System:
Host: andrey-HP-Pavilion Kernel: 4.15.0-45-generic x86_64 bits: 64
compiler: gcc v: 7.3.0 Desktop: Cinnamon 4.0.9
Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic
Machine:
Type: Laptop System: Hewlett-Packard
product: HP Pavilion dv6500 Notebook PC v: Rev 1 serial: <filter>
Mobo: Quanta model: 30CF v: 85.26 serial: <filter> BIOS: Hewlett-Packard
v: F.34 date: 03/22/2011
Battery:
ID-1: BAT0 charge: 14.2 Wh condition: 41.1/55.1 Wh (75%)
model: Hewlett-Packard Primary status: Charging
CPU:
Topology: Dual Core model: AMD Athlon 64 X2 TK-55 bits: 64 type: MCP
arch: K8 rev.F+ rev: 1 L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 svm bogomips: 7200
Speed: 1800 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 1800 2: 1800
Graphics:
Device-1: NVIDIA C67 [GeForce 7150M / nForce 630M] vendor: Hewlett-Packard
driver: nouveau v: kernel bus ID: 00:12.0
Display: x11 server: X.Org 1.19.6 driver: nouveau
unloaded: fbdev,modesetting,vesa resolution: 1280x800~60Hz
OpenGL: renderer: NV67 v: 2.1 Mesa 18.2.2 direct render: Yes
Audio:
Device-1: NVIDIA MCP67 High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:07.0
Sound Server: ALSA v: k4.15.0-45-generic
Network:
Device-1: NVIDIA MCP67 Ethernet vendor: Hewlett-Packard driver: forcedeth
v: kernel port: 30f8 bus ID: 00:0a.0
IF: enp0s10 state: down mac: <filter>
Device-2: Broadcom Limited BCM4311 802.11b/g WLAN vendor: Hewlett-Packard
driver: wl v: kernel port: 30f8 bus ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
Drives:
Local Storage: total: 149.05 GiB used: 11.80 GiB (7.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1637GSX size: 149.05 GiB
Partition:
ID-1: / size: 145.71 GiB used: 11.80 GiB (8.1%) fs: ext4 dev: /dev/sda1
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A gpu: nouveau temp: 64 C
Fan Speeds (RPM): N/A
Info:
Processes: 194 Uptime: 1h 05m Memory: 3.61 GiB used: 1.03 GiB (28.5%)
Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19
inxi: 3.0.27
пробовал по ссылке: https://medium.com/@gaganjyot/libredwg- ... 1cf9a2fdff,
на команде:
./configure --enable-trace
и так
andrey@andrey-HP-Pavilion:~/Загрузки/libredwg-0.7.1608$ ./configure && make && make install
как понял ругается на Python
Вообщем, как посмотреть dwg в Linux?
